Skip to content
English
  • There are no suggestions because the search field is empty.

Installing TimeClock with RFID or Fingerprint Reader

Stämplingsterminaler · Steg-för-steg-guide
Uppdaterad 2026-11-20 13:13
Brief answer

Start the older Windows-based TimeClock tablet, verify the terminal’s identity and address, connect it to the workplace’s wireless network, then restart the tablet. Finally, ensure that TimeClock opens and that a test clocking is recorded.

Fördjupning
Before you begin

This guide applies to the older key-locked Windows-based TimeClock tablet with RFID or fingerprint reader. The terminal uses the older kiosk interface with the menu option Exit Fullscreen.

Do not use this guide for TimeClock Light, Webstamp in a regular web browser, or a terminal where the shell, menus, or buttons do not match the description.

You will need the terminal’s key as well as the name and password for the workplace’s wireless network.

Do not reset the terminal

A reset may erase the terminal’s saved settings. Contact Timeplan support if the terminal’s interface does not correspond to the steps in this guide.

Steg för steg
Starting the terminal
Unlock the terminal shellUnlock the clock-in terminal with the supplied key.
Start the tabletPress the terminal’s Power button. If the button is recessed, you may need to use a pen to access it.
Lock the terminal shellLock the tablet in the terminal shell again once it has started.
Wait until TimeClock opensThe clocking programme should start automatically. #### Details - Wait until the TimeClock start view appears. If the clocking programme does not open, contact Timeplan support before proceeding.
Steg för steg
Verify the terminal’s identity
Open SettingsOpen Settings by entering 000 followed by C. #### Details - This step applies to the older kiosk interface. If Settings does not open as described, contact Timeplan support.
Check GUID and addressCheck the terminal’s unique GUID and the address linked to the terminal. #### Details - The GUID identifies the terminal to Timeplan. Do not change the GUID or address. Changing either value may cause the terminal to lose connection with Timeplan.
Steg för steg
Connect the terminal to the network
Open the kiosk menuSelect an empty area on the screen, where there is no text, and hold your finger on the screen for about two seconds.
Exit fullscreen modeSelect Exit Fullscreen from the menu. #### Details - When fullscreen mode is exited, Windows and its network settings will become accessible. If the menu or option does not appear, contact Timeplan support.
Connect to the wireless networkSelect the network icon at the bottom right in Windows and connect the terminal to the workplace’s wireless network. #### Details - Choose the network that the terminal should use. - If no physical keyboard is connected, open the on-screen keyboard using the keyboard icon at the bottom right. - Ensure the terminal has a full network signal to function satisfactorily.
Steg för steg
Restart and verify the terminal
Restart the tabletOpen the Windows menu and select to restart the tablet. #### Details - Wait until Windows has started and TimeClock opens again. Contact Timeplan support if the clocking programme does not open or if the terminal cannot connect to Timeplan.
Verify with a test clockingWhen the tablet has started and TimeClock is displayed, the terminal can be used for clocking. Perform a test clocking with an employee who has the correct terminal profile and access to the terminal. #### Details - Verify that the correct employee is identified and that the clocking is recorded for the correct employee in Timeplan. - Check the recording on the Clockings and Balances page.
Fördjupning
Webstamp is a separate interface

Webstamp in a regular web browser does not use the same installation flow as the older Windows-based tablet terminal. Therefore, do not follow the steps for the key-locked shell, the older Settings view, long press, Exit Fullscreen, or the Windows menu when using Webstamp.

Today's Webstamp has a separate read-only diagnostics view. Here, support can see the terminal’s GUID and API address as well as information about terminal name, connection, DeviceServer, connected readers, signatures, and server and client versions. Access to the diagnostics view is not described in this customer guide.

TIMEPLAN_IMAGE_