Skip to content
English
  • There are no suggestions because the search field is empty.

Generating Absence and Deviation Reports

Rapporter · Steg-för-steg-guide
Uppdaterad 2026-10-27 22:30
Brief answer

Go to Reports → Deviations and select a report according to the question you want to answer. A list of absence events, a day-by-day overview, and sickness absence percentages show different aspects. Check the report period and selection, and compare a known example with the employee's records before using the results.

Fördjupning
Before you begin

Decide whether you need to monitor an employee's absence, compare the extent within the organisation, review specific deviation codes, or view planned holidays. It is advisable to start with a short period and a task you are familiar with. This makes it easier to understand the report data before generating a larger dataset.

Ensure the correct company is selected and that you have the necessary permissions for the report and tasks. Reports may contain personal data. Select and share only the data required for the follow-up.

Steg för steg
Choose report and data
Choose reportOpen the Deviations reports page and select Report type according to what you need to follow up. #### Detailed information - Choose Absence report if you want to read full-day and part-day absences per employee. Choose Absence - weekly overview if you prefer to monitor absence day by day in a consolidated overview. - Choose Deviation by code to specify which deviation codes the report should include. Such a selection describes the chosen codes, not automatically all absences in the organisation. - Choose Sickness absence when you need a summary in percentages by gender and age. Do not use this report as a replacement for a list of an individual employee’s entries. - Choose Manually updated time stamps if you want to follow up the number of time stamps linked to an administrator. Read the explanation under the step Follow up manual time stamps before interpreting the count; the report does not show all absence events or every individual change. - Choose Holiday overview when you need to see planned holiday periods. This is not the same data as a calculated holiday balance or a list of all leave codes. - For Absence report, Absence - weekly overview, Deviation by code, Sickness absence, and Holiday overview you need the Basic Schedule Module. Manually updated time stamps belong instead to Personnel & Administration. You also need permissions for the report you want to use; access to the reports page does not automatically grant access to all reports. If a choice is missing, an authorised administrator can check module and report permissions.
Check period and selectionSpecify From and To dates and select the department, task, or employee that the chosen report offers. #### Detailed information - Without saved selections, the page suggests the last six days including today. This is just a starting proposal. Change the period if the event you are investigating started earlier or continues later. - Timeplan remembers previous selections. Therefore, check both dates and organisational selections when you switch reports or return to the page; previous settings may fit a different query than the one you are working on now. - The department selection is used only by some reports and does not appear if the department feature is turned off. A missing department field does not by itself mean something has gone wrong. Use the selections relevant to the chosen report type. - For Deviation by code, you can also select an employee and deviation codes. The end date must not be after the current date. Use a planned absence report if the question concerns future holidays instead. - Deviation by code and Holiday overview offer PDF or Excel output. The other reports on the page use PDF. Check the format choice if you want to work further with the results in a file.
Steg för steg
Read the report you have chosen
Read absence per employeeChoose Absence report and check dates as well as full-day and part-day absences for the employee you want to follow up. #### Detailed information - The report aggregates absence per employee and shows dates in chronological order. Read the employee’s name and employment number together if multiple employees have similar names. - Full-day and part-day absences are shown separately. An entry for part of the day should not be read as the employee being absent the entire day. Check the deviation code and the recorded extent. - When the department feature is used, employees are grouped under departments. Otherwise, the grouping is by task. Read the group heading before concluding that an employee is missing in the area you are looking at. - Here you see absences that have been entered in the planning, not absences derived from time stamps and balances. Therefore, begin at the Weekly overview page if you want to verify a date or deviation code. Absence may also be recorded on a day when the employee has no shift. - For the employee to appear, they need to be active and have the selected task as the main task in their employment contract on the absence day. It is not enough that the task is another permitted task in the contract. Check the connection for that specific date if someone is missing in the report. - For full-day absence, the times shown are from the start of the first shift to the end of the last shift. The time interval is therefore not a measure of working hours after deducting breaks or gaps between shifts. For part-day absence, read the recorded absence time instead.
Follow absence day by dayChoose Absence - weekly overview and read the employee’s row together with the date columns. #### Detailed information - The report gives an overview over several days, with the deviation code abbreviations in each day. Check their meaning on the Deviation codes page if an abbreviation is unknown. - The overview is grouped by task and calendar month. One page can show up to 31 day columns, and a longer interval continues on further pages. Check month, year, and page order before assessing the entire period. - If part-day absence exists on a date, the whole day cell is shown in italic text. If both full-day and part-day absence exist, the full-day absence is shown above the part-day absence, but the full-day row is also italic. Read both; the italics do not mean that everything in the cell applies to part of the day. - Sundays and public holidays have red date headers. The colour marks the day in the calendar, not that the employee’s record necessarily contains an error. - In the report selection, the option is called Absence - weekly overview, while the finished report’s heading is Absence overview. It is the same report. Date columns may continue to the end of the month even if your selection ends earlier; empty cells after the end date do not say anything about absence. - As in the Absence report, the selected task must be the employee’s main task on the absence day. However, this overview is not limited to active employees. The reports may therefore contain different employees even when you select the same period and tasks. - Use the overview to find a pattern or a day that needs investigation. Then compare with planned absence to verify the extent and which code has been used.
Choose deviation codesChoose Deviation by code, mark the codes you want to follow up, and check employee, task, and period. > [!WARNING] > Check the absence days before using the period as a basis. > > The report’s from and to dates may cover several distinct absence periods, even with days without absence between. Do not use the interval as proof of continuous absence, for example in ongoing salary handling. #### Detailed information - The report is based on approved, calculated balances with the deviation codes you have marked. A mark in the planning or a time stamp is not alone sufficient for an item to be included. Compare with the Time stamps and balances page when you want to check which data has been calculated and approved. - When you mark several codes, the report includes entries related to any of them. An employee does not need to have all the codes to be included. If you do not mark any code, the result will be empty; that choice does not mean all absence will be shown. - If you select an employee directly, the data may include their balances across several tasks. When selecting by organisation, it is the task related to the balance that determines whether the entry appears. Check which selection you use before comparing two summaries. - If the deviation code also exists as planned absence on the day, that entry is used to describe absence as full or part day. Otherwise, Stamped absence is shown. That term describes how the report classifies the balance, not a full history of how the absence was recorded. - Separate absence periods for the same employee can be grouped between a first and a last date. Check the individual days in the data if you need to know if the absence was continuous. A long date interval does not mean there is absence every day in between. - The report is sorted by task and the absence start date before the employee’s name. An employee’s rows may therefore not be grouped together when other employees have absence in between dates. - Balance uses the unit applicable for the account. A time balance is shown as time in PDF and as decimal hours in Excel; for example, one and a half hours corresponds to 1.5 decimal hours. Check the unit before comparing with an account that counts amounts. - PDF is suitable when you want to read the finished data. Excel can be useful when you need to sort or compare rows further. Save the period and code selection information with the file so it is clear what the summary covers.
Review sickness absenceChoose Sickness absence when you need percentages. Read the period, time base, and report explanations before comparing groups. #### Detailed information - The report summarises totals and breakdowns for women and men. Age groups are under 30 years, 30–49 years, and 50 years or older. Missing age is reported separately and should not be confused with the employee being completely absent. - Sickness absence also splits at 60 days. The division is based on the employee’s recorded number of sick days, not on the date interval you have chosen for the report. A short report period may thus include sickness absence that pertains to a longer sick period. - The report can use full- and part-time sickness absence as well as sickness absence from registered balances connected to sickness absence codes. It thus cannot be checked solely by counting visible full-day marks in the schedule. - The chosen tasks are summarised together, not as a separate percentage report per task. If you need to compare two parts of the organisation, the selection and period must be clear for each extraction. - The task selection determines which employees’ employment contracts are included. The selected task may be the main task or another permitted task in the contract. Then the employee’s all shifts within both the contract period and the report period are counted, including shifts on other tasks. Breaks are deducted. The report’s time base is therefore not limited to shifts performed on just the selected tasks. - The total sickness absence percentage compares sickness absence time with planned time. For the breakdowns under 60 days and from 60 days, sickness absence in the group is compared with the total sickness absence time. The percentages answer different questions and should not be read as the same measure. They are rounded to whole numbers; if the time to compare with is zero or less, the percentage is left blank. - From the registered sick day 15, the report replaces actual sickness absence time for a qualifying day with the employee’s contracted weekly working time divided by seven. This applies when the day has a full- or part-time sick marking and the weekly working time is positive. Even a part-time sick day receives the full replacement value; it is not reduced by the part-time extent. Before sick day 15, without sick marking or without positive weekly working time, the actual approved sickness balance is used instead. - The setting Calculate planned scheduled time for part-time absence under Administration → Contract settings governs a separate addition to planned time. If the setting is off or missing, the addition is zero. With a positive part-time extent, the addition is limited to the lesser of the actual sickness balance and the proportion of weekly working time divided by five. Without a positive extent, the registered part-time length is used, still at most the actual sickness balance. This addition is separate from the replacement from sick day 15 and is capped against the actual balance before that replacement is made. - Overlapping employment contracts can cause the same shift, sick balance, part-time addition, and replacement from sick day 15 to be counted multiple times. If an employee has contracts valid simultaneously, you must check report times against contract dates and data before comparing percentages or further using the report. - On the end day of a dated employment contract, the actual sick balance may drop even though the day’s shift and sick marking are still included. This can reduce both sickness absence time and a part-time addition, while a sick marking from sick day 15 may still provide the replacement value. If a deviation occurs precisely on the end day, compare the balance, sick marking, and contract dates instead of correcting the record solely based on the report. - Age groups are based on the year you generate the report minus the employee’s birth year, not whether the employee has already had a birthday. Even when selecting an older report period, the year's age groups are used. Keep that in mind when comparing with a previously saved report. - If a result seems unexpected, check both planned time and sickness absence for a few known employees. Pay special attention to overlapping employment contracts, contract changes, and part-time sickness absence. Do not draw conclusions about the entire organisation solely from a percentage without checking the data.
Follow up manual time stampsChoose Manually updated time stamps when you need to investigate manual records and the administrators listed in the report. #### Detailed information - In the report selection, the option is called Manually updated time stamps, but the report’s heading is Manually added time stamps. This counts individual time stamps that are used and linked to an administrator. Count therefore does not mean number of changes, complete check-in and check-out pairs, or worked hours. - It is the administrator link on the time stamp that determines if it is counted. The report cannot reliably distinguish between time stamps originally from the app, an import, or a terminal. Do not use it as a complete change history or proof of the time stamp’s origin. - The period applies to the actual time stamp date, and the employee must have an employment contract valid that day. Time stamps removed or marked as Do not use are not counted. Start by checking dates and usage if the count does not match the records you see. - Employees are grouped by task. Read the name and selected period before comparing the data with the Time stamps and balances page. - Primarily, the task on the time stamp is used. If missing, the employment contract’s main task is used. Overlapping contracts can cause a time stamp to be counted more than once, so check contract dates if counts are unexpectedly high. - The report shows Name, Count, and Added by, not a row with exact timestamps for each time stamp. Multiple administrators may be listed together. Do not assume a name in the summary shows who made each individual change. - A manual change is not necessarily incorrect. Follow up dates, time stamps, and context before judging if anything should be corrected. The report does not alter the time stamp when you open it.
Check holiday periodsChoose Holiday overview and check when holidays are planned for employees in your selection. #### Detailed information - The report is based on full-day holidays marked in the planning, not on part-day holidays or calculated holiday accounts. It therefore does not show how many paid days the employee has left or what the salary impact of the holiday should be. - When selecting by department or task, the employee’s main task on the holiday date is used. Compare the linkage with the employment contract if an employee ends up in a different group than expected. - A day without a full-day holiday mark breaks the period in the report, even if the day lacks a shift. If a holiday appears divided into several periods, you need to read holiday records day by day, not just check shifts between dates. - The report is based on your date selection and does not determine the entire underlying holiday period outside this selection. Check planning before and after the boundary dates if you need to know when the entire holiday starts and ends. - How Count is calculated depends on the setting for holidays per week in the employee’s contract. With five days, full-day holidays on Monday–Friday are counted even without a shift. A Saturday or Sunday with a full-day holiday is counted only if fewer than five earlier days in the same week have holiday markings. Even days before the report start date can affect the count. Other settings require a scheduled day for the date to be counted. - A period where no days count will not be shown. Read the Count together with the dates and planning, and do not use this data as a holiday balance or an automatic indication of the number of days to deduct from the employee. - You can choose PDF or Excel. Verify that the same period and organisational selection are used when comparing multiple extracts.
Steg för steg
Verify the results
Compare with recordsSelect Show report and check the heading, period, and selection. Then compare a known employee or event with the appropriate page in Timeplan. #### Detailed information - Start by confirming that the report answers the question you wanted to examine. An overview of planned holidays and a report on deviation codes need not contain the same dates or numbers. - Reports that are displayed open in a new tab or window. When you select a file format for downloading, you get a file. Check the format if the result does not appear where you expected. - If an event is missing, check period, task, possibly employee selection, and code selection before changing the record. An empty result may be a consequence of the selection you made. - Correct an erroneous entry on the page where the data belongs and then generate the report again. The report itself does not change absence, time stamps, employment contracts, or balances. - Keep the period and important selections with the report if it will be compared later. Share only the personal data required for the recipient’s follow-up. You are done when you can explain which data the report shows and when a known example matches the records. Check selections again if you change report type; the same date interval does not mean two reports answer the same question.
Steg för steg
Frequently asked questions
Why can’t I find a particular absence event?Check dates, task, employee, and selected codes. Also verify whether you are using a report for full- and part-day absence, stamped absence, or planned holidays. Then compare with the actual records on the Time stamps and balances page or in the planning.
Is the Holiday overview the same as the employee’s holiday balance?No. Holiday overview shows planned holidays. A holiday balance is based on other data and calculations. Do not use the report’s dates or number of days as a replacement for checking the employee’s balance.
Why can’t I directly compare the sickness absence percentage with the number of absence days?The percentage report uses time bases and breakdowns that are not the same as counting calendar days in an absence list. Check the period, selection, and report explanations, and compare both planned time and sickness absence before drawing conclusions.