Skip to content
English
  • There are no suggestions because the search field is empty.

A time clock entry is missing or not displayed in Timeplan

Personal · Steg-för-steg-guide
Uppdaterad 2026-11-12 10:50
Short answer

Start on the Employee's Time recordings and balances page for the relevant day. Also display time clock entries that are not used in the calculation. Then continue with the clocking method used by the Employee. Do not add a new time clock entry until you know that the original is missing and what the correct time is.

Fördjupning
Before you begin

Find out which Employee is affected, the date and approximate time, and whether the Employee used the app, Webstamp or a physical terminal. Also ask which message or confirmation was displayed. This information determines where you should continue troubleshooting.

Avoid a duplicate or estimated time clock entry

A time clock entry that remains stored locally or has been registered but is not yet visible in the calculation may appear later. Therefore, do not add a new time clock entry until you have checked the entire sequence of events. If a correction is required, it must be based on the actual time, not an estimate.

Steg för steg
Find the cause
Display all entries for the dayOpen the Employee's Time recordings and balances page for the correct date and clear Hide disabled time recordings. This also displays saved time clock entries that are not in use. Displaying them does not change which time clock entries are used in the calculation. #### Further details - If the time clock entry is displayed only after the filter is cleared, the entry already exists in Timeplan. You therefore do not need to add a duplicate. However, the filter does not indicate why the time clock entry is inactive; for example, an Administrator may have disabled it during a previous correction. - When all entries are displayed, there is a checkbox in the first column of the time clock entry. A selected checkbox means that the time clock entry is in use. Also review the information about who added or removed the entry, and compare it with the day's messages, direction, time, Department and Deviation. This helps you understand whether the time clock entry has been replaced or needs to be corrected in another way. - Do not change the checkbox merely to make the time clock entry visible. If you change the selection and then select Save on the page, you affect which entries are used in the calculation. The original remains even when it is disabled. Therefore, first check whether another time clock entry has already replaced it so that both are not accidentally put into use. - If the time clock entry is not displayed at all, continue with the clocking method used by the Employee. - If the time clock entry is displayed but the Attendance list or balance has not been updated, the entry has been saved. Continue to the calculation check later in this article. - Check that you have opened the correct Employee and date before continuing. This is particularly important for night work, as an entry close to midnight may belong to a different working day than you initially expect.
Compare with what actually happenedCheck whether the missing event is a clock-in entry, a clock-out entry or a change of Department. Compare it with the plan, absence and other time clock entries before deciding that anything needs to be added. #### Further details - An incorrect or missing Shift may make a correct time clock entry look unexpected. The timeline on Time recordings and balances displays planning, absence and entries together. - A time clock entry around midnight may belong to the previous or next working day. Therefore, also check the adjacent day. - Record the time that can be confirmed by the Employee, supervisor or another approved source. This information is required if the time clock entry is corrected later. - Always compare the entire sequence of events. For example, a missing clock-out entry may affect how a later clock-in entry is interpreted, even if the later entry itself is correct.
Steg för steg
Check the entry
Check the physical terminalCheck whether the terminal is active and connected to Timeplan. Then check that the Employee is permitted to use the terminal and has the correct identification method in Supplementary information. #### Further details - Under Terminals, you can see, among other things, whether the terminal is active and which IP addresses are permitted. The Allow enrollment setting is used when fingerprints or other identification details are enrolled. It does not control the normal transfer of time clock entries. - If the terminal was not connected, the entry may have been stored locally. Such events are displayed on Offline time recordings once the terminal has sent them to Timeplan again. - If other Employees can clock in or out at the same terminal but the affected Employee cannot, first check the Employee's permitted terminals and identification methods. - A terminal displayed as active may still have a temporary communication error. Therefore, compare the time with other entries from the same terminal and note the terminal's name before contacting support.
Check WebstampFind out whether Webstamp displayed a normal confirmation or stated that the time clock entry had been saved offline. An offline confirmation means that the entry has been stored locally in the browser and has not yet been verified in Timeplan. #### Further details - Reconnect the device and then check the day on Time recordings and balances. Do not repeat the clocking until you know whether the first entry was received. - Do not clear the browser's site data while an offline event may still be stored locally. Doing so may cause the supporting data for the entry to be lost. - If Webstamp displays an error message, save the exact text and time. This information is required to distinguish a rejected attempt from an entry awaiting transfer. - An empty local queue or a message stating that the transfer is complete does not always prove that every offline event has been accepted by Timeplan. The current Webstamp client may clear the queue after a technically successful response even when an individual entry is rejected, for example because the login is no longer valid. - Therefore, always check the actual entry on Time recordings and balances. If it is still missing after reconnection, document the time and confirmation before making a manual correction.
Check the appCheck what the app displayed and whether the connection was interrupted during the clocking. Once the connection is restored, compare it with the saved entries on Time recordings and balances before the Employee attempts to clock in or out again. #### Further details - The app requires a connection to Timeplan and has no local queue that saves time clock entries for later transfer. When the connection is restored, the app retrieves current information from Timeplan but does not automatically resend the previous attempt. This is therefore not the same offline handling as in Webstamp. - If the connection is interrupted after the time clock entry has been sent, Timeplan may already have saved it even if the response never reaches the app. An error message or unchanged information under Last clocking is therefore not sufficient to determine that the entry is missing. Check the saved time and direction after reconnecting. - Also check the Department if the Employee selected a Department when clocking in. In some cases, the clock-in entry and Department change are registered separately. An interruption may then leave only one part saved, and confirmation of one part does not mean that the entire process was completed. - If the Employee's Terminal profile requires a position, no time clock entry is saved when the app or browser does not provide one. The message is Geoposition tracking is mandatory, please enable it in your web browser. - If the clocking button is not displayed, the Employee may already have a registered absence for the relevant time or may not have the required access. Check the day's supporting information before making a manual correction. - Ask the Employee to provide the exact time and describe what the app displayed. A screenshot of an error message is more useful than a general description that the clocking did not work. - Also check that the Employee was logged in as the correct person. A successful entry always belongs to the identity that was active when the action was performed.
Steg för steg
Check the calculation
Check the calculated resultRead the messages on Time recordings and balances and check that the time clock entry has the correct direction, Department and day assignment. A saved entry may have been transferred correctly but still not be used in the day's calculation. #### Further details - If the entry is visible but falls outside the expected sequence, correct the cause, such as an incorrect direction or day assignment, instead of adding another time clock entry. - If both the entry and its details are correct but the balances or status are not updated, a calculation job may be waiting. Server queue is a diagnostic view for Administrators and displays background jobs that are waiting or being processed. - Do not remove or restart anything in the queue. If the same job remains and the number of waiting rows does not decrease, note the time, job type and number of rows, and provide this information to support. - Once the queue has finished processing, reopen the day and read the messages again. This prevents you from assessing the result using a view that still displays older calculated values.
Steg för steg
Correct the problem
Establish the actual timeConfirm the time with the Employee, supervisor or another approved source. Then follow your correction procedure on Time recordings and balances. #### Further details - Add only the event that is actually missing: In, Out or a change of Department. If the original exists but has the wrong time, direction or Department, do not correct it by overwriting the old row. Instead, disable the incorrect entry and add a correct replacement in accordance with your procedure. Then save the day itself; a new row on the screen does not mean that the change has been saved. - Check whether the time belongs to the previous, current or next working day and select a Department included in the Employee's Employment contract. - If the day falls outside a valid Employment contract, is in a closed Salary period or is read-only for your permissions, it cannot be corrected from the page. Ask the responsible Administrator to address the cause in accordance with your procedures. - Save the correction and then check both the entry and the calculated result. Displaying the row is not sufficient if the direction, Account or day is still incorrect.
Fördjupning
Check the result

Check that the time clock entry is now displayed with the correct time, direction, Department, source and day assignment. Read the day's messages again and check that the timeline, balances and relevant status view have been updated. If the problem persists, document the Employee, date, time, clocking method, error message and what you have already checked before contacting support.

Steg för steg
Frequently asked questions
The terminal or app confirmed the time clock entry. Why is it still not displayed?A physical terminal or Webstamp may have stored the entry locally when there was no connection. First check whether the confirmation referred to an offline event and allow the device to reconnect. However, the app has no such local clocking queue. If the connection was interrupted after the app sent the time clock entry, it may already exist in Timeplan even though the app still displays the previous state. Therefore, check the saved entries before anyone clocks in or out again. Also save the exact confirmation or error text.
Why is the time clock entry displayed but not used?The entry exists in Timeplan, but this does not automatically mean that it should be used. An Administrator may have disabled it during a correction, for example to replace an incorrect time. Display all entries and check the checkbox on the row, as well as the information about who changed the entry. Then compare the direction, time, day assignment, Department, Deviation and the day's other events. The messages on Time recordings and balances help you understand the supporting information. Do not reactivate the original until you know why it was disabled and whether a replacement time clock entry already exists.
Should I add a new time clock entry immediately?No. Start by displaying all entries and checking the clocking method. Add a new time clock entry only when you know that the original is missing and have an approved source for the actual time.